 |
-
Microprocessor
base control
-
Simple
operation
-
Auto
Start/Stop
-
LED
charge status indicators
-
Electronic
backup timer
-
SCR
output control
-
Lightning/surge
protection
-
AC
input circuit breaker
-
Current
limited design
-
Battery
type select
-
UL/CUL
(CE option)
-
Dual
AC input (export option)
-
50/60
HZ (export option)
|
The
MAC SCR series of battery chargers were designed for
wet and sealed valve regulated (SVR) lead acid batteries
used in demanding deep cycle applications. For personnel
carriers, man lifts, golf carts, floor care equipment,
and other DC powered vehicles. Its overall simplicity,
method of operation and trouble-free performance makes
the SCR charger attractive to every type of equipment
user. To operate after the charger is connected to
the battery, the user simply plugs in the AC power
cord to activate the unit. That's all there is to it.
The charger not only immediately starts charging the
battery, but also monitors the battery condition determining
the proper charge requirements and the correct finish
before automatically terminating the charge when the
battery is full. DC disconnect is required to reset
circuit.
- Auto
Start/Stop Control with (5) LED status indicators:
- Charge
complete
- 80%
charged
- Incomplete
flashes in SVR mode
- Charger
on
- Abnormal
cycle
- DC
Output:
12V - 10 to 50A, 24V - 10 to 30A, 36V - 10 to 20A,
48V - 10 to 17A
- AC
Supply:
108 - 132V, 60HZ, Single Phase
or
108 - 132/216 - 264V, 50/60 HZ, Single Phase
- Connections:
8ft. AC with 3-wire grounded plug.
7ft DC output cord - DC plugs available at extra cost.
UL, CUL listed chargers must ship with DC connectors
- Fuses:
Input - Manual reset circuit breaker.
Output - Fuse or breaker.
- Charger
Versatility:
Charge conventional wet batteries or (SVR) sealed
valve regulated batteries.
- Dimensions:
T3 Width 8.4" - Depth 10.6" - Height 10.6" with handle.
P3 Width 9.4" - Depth 14.5" - Height 12.4" with handle.
|
